Tile tiling is completed, after the decoration of the space is polished, the color pollution on the tiles has become a problem that many consumers have to face. For how to explore the color on the tiles, we need to effectively summarize and deal with, so that we can get twice the result with half the effort. Below, tile repair color manufacturers summarized tile decontamination anti-staining techniques and methods for your reference.

In daily life, the pollution of floor tiles is usually the following: daily pollution; tea, ice cream, grease, beer; sediment, rust, mortar; paint, drawing pens; soy sauce, vinegar, toner; ink and so on. And these contaminations are handled differently. Tile repair color manufacturers understand that the common methods are as follows:

1. For tea stains, fruit stains, coffee sauce and vinegar, shoe prints and other stains, use sodium hypochlorite dilution (bleach). Soak for 20-30 minutes and then wipe with a cloth; some stains that penetrate into the brick for a long time need a few hours to soak through.

2. For moldy spots formed by moldy ink and antifouling wax, use sodium hypochlorite diluent (bleach). To use, simply apply bleach to the stain and soak for a few minutes.

3. Use hydrochloric acid or phosphoric acid solution for cement, limescale, water rust, rust spots, and wipe several times.

4. Use alkaline detergent or organic solvents (bing ketone, triethylene) on paint, oil, oil-based markers and surface antifouling wax layer to remove paint and oil.

5. The use of gum hammer prints to remove stains: first soak in 20%-40% sodium hydroxide (NaOH) solution for 24 hours, and then wipe with a cloth, and then soak in 30%-50% hydrochloric acid (Hcl) solution for 30 minutes, and then wipe with a cloth.

6. Lime scale acid cleaner

If the tiles are stained with rust, you can clean them with a 2% oxalic acid solution and then wipe with water. Grind 3-4 tablets of vitamin C into powder, sprinkle it on the surface of floor tiles, and then rub it with water for a few times to remove rust spots as well. If the rust is old, soak it with a mixture of 10% oxalic acid, citric acid and water, and then wipe it over again with concentrated salt water. If you have a fresh lemon, squeeze out the juice, drop it on the rust, rub it with your hands and repeat a few times until the rust is removed, then wash it with soapy water.

(Note: rubber gloves should be worn when using the above decontaminants; after the stain is removed, scrub the brick surface with water)

Tile repair color manufacturers say to use professional reagent tools as follows:

1. with professional cleaners, chemical decomposition method to decompose the pigment components infiltrated into the polished tiles, floor tiles, no odor, so that the surface media to be thoroughly cleaned, cleaned to restore the original luster color. 2. you can use the super water, put a single layer of toilet paper on the stains to absorb the super water to prevent it from flowing around, according to the ratio of 1: 1 mixed, shaken well and then poured on the stains, and then a little bit more, so that it is saturated, stay for 30- 50 minutes to penetrate and decompose, then wipe off the remaining stain with a damp towel. If there are shallow stains, directly pour the C type on the mixed AB water, they will quickly react to form a new one.

3. If your floor tiles are man-made, it means that the surface glaze layer and pigment contact oxidation, color spots. You can use 84 disinfectant to clean it, and then use waxing and polishing tools to repair it.

4. If the marble floor tile is natural, it is made of calcium carbonate. Material density of different marble is porous material, polishing tools are not good repair solution. If the household, you can use steel wool dipped in lemonade or vinegar (strong acid is prohibited, will corrode the marble) wipe clean, and then immediately rinse with water, dry, polish can be. If the pursuit of very good results, you can buy specialized marble cleaners and care agents.

5. Hydrochloric acid or phosphoric acid solution mixed with water at a ratio of 1: 5, will be mixed with water sprayed on it (you can also wear rubber gloves, wipe with a rag), wipe several times.