Have done the renovation of people know, tile bump or heavy impact are difficult to avoid, will lead to broken porcelain. So, in the case of not replacing the new tiles, the tiles broken by the broken porcelain can be repaired to the effect before the broken porcelain? Does tile repair color work well after restoration? 

Tile Repair Colorant manufacturers are very clear that all broken tiles can be repaired and restored, and the effect of the repaired tile is the same as before it was broken.

Tile repair coloring to repair broken tiles can be completed in just a few simple steps.

Tile repair color material specific operation is as follows:

Fill the grass-roots level, repair paste, scrape the grass-roots level, adjust the top coat color, color, spray glaze.

First, the grass-roots level to fill, and do a good job of repair paste priming and scraping;

1. Clean up the residual dust; first of all, what we have to do is to use the electric seam cleaning rod to beat and grind the broken tile residue, and then clean up the residue to ensure that the broken tiles are clean and dust-free.

2. Prepare tile repair color; after the broken part of the tile is cleaned up, the second step is to prepare the color of the repair paste. The color of the repair paste should be about the same as the color of the tiles, or slightly lighter. Remember, the color of the repair paste should be deeper than the color of the tiles, otherwise the color of the back of the finish will not cover the color of the repair paste, the color difference is too large.

3. Scrape and polish; repair paste with a good, with a utility knife will repair paste scraped to the broken tile place. Be sure to scrape the repair paste flat. After the patch is cured, first use 180 sandpaper to sand, then use 400 sandpaper to smooth, and then use 600 sandpaper to smooth.

Second, the preparation of top coat color, coloring, spray glaze;

1. Prepare tile repair color color; to be plastered grass-roots grinding smooth, you can prepare the topcoat. According to the color of the tile, to prepare the color of the top coat. It is good that there is no color difference between them, otherwise it will affect the repair effect. The color of the paint is too strong to be completely dispersed. You can squeeze a drop of medical alcohol to dilute the paint color, so that the paint color is naturally and fully dispersed.

2. Color spray glaze; after the paint color is adjusted, it can be painted. Brush paint color, it is recommended to use a sponge dipped in paint color, and then dipped in the paint color on the surface of the base of the repair paste, you can complete the painting. The sponge can fully disperse the paint color, more importantly, the sponge can also draw lines.

3. Spray glaze; explained below, the glaze is to protect the color of the top coat of the protective layer. Top glaze has "bright glaze" and "matte glaze" two kinds. After painting the paint color, wait for the paint color dry and then spray glaze!

After spraying the glaze, as long as the color of the topcoat and the color of the tile is the same, there is no color difference, tile repair is complete.

CONCLUSION: Tile refinishing color is easy for tile repair. The hard part is adjusting the finish color and drawing the tile lines. The finish color and lines directly affect the tile repair results.

You can contact us to learn more about tile repair colorants.